What is PoolSan?
PoolSan is a saturated complex ionic aqueous solution containing chiefly
Copper, Zinc, Gold, Silver, Aluminium, Manganese, Iron and Nitrogen.
PoolSan completely eliminates the need for chlorine, algaecides and
flocculants in treating your swimming pool water.
How does PoolSan work and why is it more effective than other pool
treatments?
The
microscopic action of the ions with the algae and bacteria are twofold.
First, the algae and bacteria in the water are destroyed through a
change in their enzyme processes as the ions break down their DNA structures
and cell walls. Second, all these charged particles floc together and
then they are more effectively trapped by the filter. The ions maintain
a stable PoolSan residual in the water until they are used up by this
process.
How does PoolSan vary from Chlorine and
even Bromine products?
In Solution PoolSan has a much lower toxicity than the extreme ratings
of chlorine and bromine. When swimming if PoolSan treated water
is swallowed it is not harmful, it will not sting your eyes, will not
bleach your hair, and is odourless.
Can I swim in the water immediately after dosing with PoolSan?
Yes. After dosage you can swim immediately, whereas chlorine
needs time to dissipate before bathing.
Is it safe if I swallow swimming pool water treated with PoolSan
solution?
Yes it is totally
safe and non toxic to humans at the recommended dosage levels and does
not pose any hazard at all as all the active ingredients are well within
the recommended limits for drinking water in the UK.
What must I do when
I first start using PoolSan solution?
Make sure that the
filter is in fact working!! Backwash your filter to ensure it
is clean. Check the pH, it should be between 6.8 to 7.4 If Not adjust
with pool acid or alkali. Add PoolSan as per the dosage guidelines on
the bottle, ensuring to add half the dose directly into the weir whilst
the filter is running and the other half just poured into the pool itself.
How do we get rid of
the chlorine presently in the pool?
Chlorine is compatible
with PoolSan. You simply add PoolSan instead of chlorine as your next
dose would be due – half in the weir and half directly into the pool.
The chlorine will evaporate on its own, and your next dose of PoolSan
will only be due in approximately four weeks.
How long does it last?
An average of four to
five weeks. This is only a guide and may vary slightly due to temperature
changes, pool usage, and hours of sunlight etc.
Are there any special considerations when disposing of backwashed
water or emptying my pool?
No. PoolSan treated water poses no threat to the environment whatsoever
unlike chlorine treated water. PoolSan treated water can even
be backwashed onto the lawn or your flowerbeds.
Can PoolSan be used in above ground pools?
Yes. PoolSan is equally as effective in above ground and
in ground pools and spas, provided the dosing guidelines are adhered
to.
What other chemicals will I need to use in conjunction with PoolSan
in my pool?
You will only need to use an acid or alkali to adjust the pH level
of the water. PoolSan will eliminate the need for flocculants
and algaecides.
How can I test
for residual levels of PoolSan solution in my swimming pool water?
The Copper in PoolSan
solution is a good indicator of the level of active ingredients in
the water. Copper content test strips can be obtained from PoolSan
UK Limited. The optimum copper content of the water should be
0.5mg/litre if the level drops to less than this you can add your next
dose of PoolSan solution – it should be noted that 2.0mg/litre
is the maximum allowable level of copper in drinking water in the UK.
Does the chemical cause
any stains in the Pool?
If you substantially
overdose your pool, turquoise marks will appear on the walls.
If you stop dosing the pool these marks will slowly disappear on their
own. If you wish to remove these marks faster use only Hydrochloric
acid (normal pool acid) for one to two weeks, making sure you maintain
the correct pH (6.8 – 7.2). Then recommence dosing with PoolSan solution
3 to 4 weeks after the stains have disappeared. The minerals
in the solution are then IONISED and will not revert to a solid nor
a crystal.
What other effects occur if I over dose my pool with PoolSan solution?
A possible effect
of substantial overdosing is white bathing costumes and very fair hair
may show a slight discolouring (very very pale blue tinge). To
return the hair to its natural colour rinse it in vinegar and then
wash as per normal. It is worth noting that under the same circumstances
in a pool treated with chlorine the same hair will show a green discoloration,
and would not be as easily remedied. THIS WILL NEVER HAPPEN IF
THE DOSING GUIDELINES ARE ADHERED TO - DO NOT OVER DOSE!
Does PoolSan react with the Ozone generators on Spas?
PoolSan will not
react with the Ozone, but it will effectively remove the need for the
Ozone.
Will the water need dosing during the Winter?
It is recommended that you administer one dose when you close your
pool, and then test for Copper after three months to see if it needs
further dosing. Due to the risk of staining, it is not advisable
to triple dose when you close your pool.
If we put half the product in the pool and half into the skimmer
box, does this affect the winter dosing when the pool is closed and
filtration is shut down?
The last dose before
closing the pool will be done half into the weir and half into the
pool (with the pump running). Whilst the pool is closed down, if the
test strip shows a lack of PoolSan i.e. Less than 0.4mg/l of Copper,
then any dosing can be done directly into the pool without having to
start up the pump etc. The first dose when the pool is reopened
must be done half into the weir and half poured round the pool with
the pump running as per usual.
Will PoolSan have an effect on green algae on grouting on tiles?
PoolSan will kill the algae responsible for staining, and with regular
brushing, the dead algae will come away from the grouting after about
one or two months. The effect of the PoolSan will be visible
within three to four days.